Sig Sauer 80% Drill Bit Set for P226, P228, P229 Frames
This set of drill bits are for drilling the trigger pin hole, the take down lever hole, and the hammer strut hole on your Sig Sauer P226, P228, or P229 frame.
- Trigger Pin Hole Drill Bit, 4.5mm
- Take Down Lever Hole Drill Bit, 9mm
- [P226/P228/P229 only] Hammer Strut Hole Drill Bit, 3/8″
Note: The hammer strut hole is slightly different on the P220 vs. the P226/P228/P229. It’s deeper into the outer wall of the magwell and needs to be 10mm or you can’t get the hammer strut in. Please select the correct model, as the Sig Sauer P220 frame requires the 10mm drill bit for the hammer strut hole, and the other frames need the 3/8″ drill bit.
Manufacturer: Made in USA