Matrix Precision Ejector for Ruger MK Pistols

Matrix Precision Ejector for Ruger MK Pistols

This is a high-quality, hardened steel ejector. Ruger’s ejectors are soft, and will wear out. These ejectors should last a lifetime.

Includes:

• Hardened Steel Ejector
• Mounting Screw
• Hex Wrench

Manufacturer: Matrix Precision

Replacement procedure: Use a sharp punch and a hammer to make a good indentation in the middle of the rivet. Then use a 1/8 inch drill and drill down only to the depth of the rivet head, so that you are not drilling into the receiver. Then use a 3 mm punch to hammer it out. The head should pop off readily. As you can imagine the danger is drilling too deep so take it slow and easy.