Ruger Zero Percent Jig

Coming Soon!

This comprehensive jig has all the parts needed for making your own Ruger .22 caliber receiver.

Included

– Jig Body

– (6) Drill Bushings and (6) Tap Bushings

– (4) Nylon Set Screws

– Router Depth Gauge

– 0.314” Drill Bit

– 5/16” Pin

– Barrel Tap Guide

– (4) ¼” Socket Head Cap Screws

– (4) ¼” Flat Head Cap Screws

– 3/16” Hex key

– 5/32” Hex Key

– 1/8” Hex Key

– 1/16” Hex Key

– Router Plates A, B, and C

– #31 Drill Bit

– #37 Drill Bit

– 3.2mm Drill Bit

– ¼” Router Bit

– ⅛” Router Bit

– 60 degree Router Bit

– Deburring Tool/Tap Wrench

– Small Tap 6-48

– Large Tap 13/16-20

– Ejection Port Drill Guide

Also Needed But Not included

– Vise

– Router

– 1.41” Blue Painters Tape

– Drill Motor or Drill Press

– Thread Cutting Oil, WD-40 or Equivalent, And Grease

– Crescent Wrench

– Round File

– Vacuum with a hose or attachment for 1 3/8 inside diameter. If you have a bigger hose, you can wrap tape around the Barrel Tap Guide on the jig so your hose will fit.