Ruger Zero Percent Jig


Out of stock

Out of stock



Coming Soon!

This comprehensive jig has all the parts needed for making your own Ruger .22 caliber receiver.

Main Jig Body

Three Steel Router Plates

5/16″ Alignment Pin


  • .314″ drill
  • #31 drill
  • 1/8″ drill
  • #37 drill


  • 13/16″-20 tap
  • 4-40 tap

Router Bits

  • 1/8″ router bit
  • 1/4″ router bit
  • 60 degree chamfer bit

Other Items needed but not included:

1.4 inch Blue Painters Tape for protecting the anodized tube

Round File for de-burring the inside of the tubes small tapped holes

Vise for holding the jig while drilling and routing.

Vacuum with a hose or attachment for 1 3/8 inside diameter. If you have a bigger hose, you can wrap tape around the vacuum pickup on the jig so your hose will fit.

WD 40 or some light oil for lubricating the router tool when cutting.

Grease for the sides of the jig plates to keep the jig from wearing when using the router.


Additional information

Weight 32 oz
Dimensions 10 × 4 × 3 in


There are no reviews yet.

Be the first to review “Ruger Zero Percent Jig”

Your email address will not be published. Required fields are marked *