Boride Sanding Jig Stones


SKU: boride-sanding-jig-stones Categories: , Tags: ,


Boride Sanding Jig Stones

Sanding jig stones are for use with our Sanding Jig, for thinning your frame above the rails.

Dimensions: 6″ x 0.5″ x 0.25″

Available in several grades from 120 grit to 800 grit.

Note: After using a Matrix Precision Rail Cutter for 1911, 2011, Sig Sauer, use a Boride Rail Smoothing Stone to smooth the inside of the rails. If the slide is fit too tightly, use a Boride Sanding Jig Stone in the Matrix Precision 1911 Sanding Jig to finalize the fit.

Be sure to use some light cutting oil or WD-40 so the stones don’t clog up. We use CRC 3-36 as an oil and 400 grit to smooth out machine marks on our aluminum frames. It’s the right grit to take off some material but not make noticeable scratches.

Manufacturer: Boride

Additional information

Weight 1.5 oz
Dimensions 6.5 × 0.5 × 0.5 in

120, 220, 320, 400, 600, 800, Pro Pack (6 stones; 1 of each grit)


There are no reviews yet.

Be the first to review “Boride Sanding Jig Stones”

Your email address will not be published. Required fields are marked *