Stone For Rail Sanding Jigs and Rail Smoothing Stones

Stone For Rail Sanding Jigs and Rail Smoothing Stones

6.00 7.00

These alumina oxide stones are 1/2 inch wide and ground to approx. .115 thick and 6 inches long for smoothing the rail cut. The Sanding Jig stones are 1/2 inch wide and 1/4 inch thick and 6 inches long.

Available in several grades from 120 grit to 900 grit.  After using a file, it is nice to smooth out the rail surface or after you get the rail to almost fit with a file, use the stone to get a final fit by taking off small amounts of metal. Be sure to use some light cutting oil or at least some WD-40 so the stone doesn't clog up. We use CRC 3-36 as an oil and 400 grit to smooth out machine marks on our aluminum frames. It's the right grit to take off some material but not make noticeable scratches.
 Choose grit and type from list.
 

Choose Rail Sanding Jig or Rail Smooting Stones:
Choose Grit:
Quantity:
Add To Cart