Stones For Smoothing Rail Cuts And Sanding Jig- Choose Type and Size

Stones For Smoothing Rail Cuts And Sanding Jig- Choose Type and Size

6.00 7.00

These alumina oxide stones are 1/2 inch wide and ground to approx. .115 thick and 6 inches long for smoothing the rail cut. The Sanding Jig stones are 1/2 inch wide and 1/4 inch thick and 6 inches long.

Available in several grades from 120 grit to 800 grit.  After using a file, it is nice to smooth out the rail surface or after you get the rail to almost fit with a file, use the stone to get a final fit by taking off small amounts of metal. Be sure to use some light cutting oil or at least some WD-40 so the stone doesn't clog up. We use CRC 3-36 as an oil and 400 grit to smooth out machine marks on our aluminum frames. It's the right grit to take off some material but not make noticeable scratches.
 Choose grit and type from list.

Choose For Sanding Jig Or Rail Stone:
Choose Grit:
Quantity:
Add To Cart